Industry: Property management

Track every apartment community's website from lease-up to stabilization with your agent

You run dozens of community websites. A few are pre-leasing, most are stabilized, and occupancy lives in a different system. Here is multifamily marketing analytics paced to each community's stage, from the first tour request onward.

Continue with Google

Free for 2 sites · No credit card

Or have your agent set it up

Set up DuckDive for my website. Follow https://analytics.duckdive.ai/agents.md

Updated 18 min read

The short answer

For multifamily marketing analytics with an AI agent, add each apartment community to DuckDive as its own website, connect the Analytics property and Search Console site behind it, and put questions to your agent about a single building or all of them. Check lease-up communities every week and stabilized ones every month, count tour requests as key events, and paste occupancy in from your property system when you want the two compared.

  • Line lease-ups up by weeks since launch, then check the calendar before you blame the website.
  • Rank communities by listing-site share of sessions to see which ones rent their audience.
  • Occupancy never leaves your property system on its own; you bring it into the chat.

A lease-up calendar for a new community's website

A community's website does a different job at each stage: it collects interest before move-ins, keeps tours booked through lease-up, then fills turnover units once the building is stabilized. Your checks should change with the job.

Lease-ups are also running long. RealPage reported in February 2025 that conventional properties in initial lease-up took about 16 months to stabilize, up from about 12 in 2019, counting stabilized as 85% occupancy or higher. Your owner or lender may draw that line elsewhere.

What to check on a new community's website at each stage
StageThe website's jobWhat to check
Pre-leasing, before move-insBuild an interest list and book hard-hat toursKey events fire; the community's name shows up in Search Console
Grand opening and first move-insTurn paid and listing-site visitors into scheduled toursTour-request rate by landing page; sessions by source
Lease-upKeep tour volume steady week after weekWeekly sessions and tour requests against leases signed
Nearing stabilizationShift traffic from paid toward organic and directGoogle Ads cost per conversion; organic share of sessions
StabilizedFill turnover units without lease-up budgetsMonthly conversions against peer communities; top queries

Stages follow common multifamily usage. Stabilization threshold per RealPage, checked November 2026.

Teams skip the pre-leasing row most often. A new domain has no search history, so the first sign Google knows the community is its own name in the Search Console query list. Until then, renters who search the name land on listing sites.

Ask your agent
The Wren at Millbrook went live for pre-leasing ten weeks ago. Pull its top Search Console queries from the last 30 days and tell me whether "The Wren" or "Wren Millbrook" is in the list yet, and at what average position.

Tools it calls list_websites get_search_console_keywords

Near stabilization, the decision is how fast to step down paid search. Read those numbers knowing that Google's housing ads policy bars rental ads aimed at the United States or Canada from targeting by age, gender, parental status, marital status or ZIP code (as of November 2026). Since you can't fence these campaigns to nearby ZIP codes, some of the clicks you pay for come from renters who were never moving to that submarket. That is why a community campaign should be judged on cost per tour request rather than on click volume.

Weekly checks in lease-up, monthly once stabilized

The pace follows the volume. RealPage found in 2024 that the average lease-up community was signing about 10 to 11 leases a month. At that pace, a week with a broken tour form is a visible dent in the month. A stabilized building produces too few website conversions per week for weekly swings to mean much, so read it monthly.

DuckDive does not know which of your communities are in lease-up. Keep that list in your prompt, or put the stage in the site's name when you add it, for example "Alder Flats (lease-up)".

The Monday lease-up check

  • Tour requests against last week. A sharp drop with flat sessions points at the form, not the market.
  • Sessions by source. A vanished listing or paid source usually means a paused campaign or lapsed package.
  • Landing pages that gained traffic. New pages with high sessions and no tour requests need a booking path.
  • Leases signed, pasted in. Then ask where leases and tour requests disagree.
  • Import freshness. Fix any source shown as failing before reading anything else.
Ask your agent
Monday check for our lease-ups, The Wren at Millbrook and Alder Flats: compare the last 7 days with the 7 before on sessions and conversions, then list any landing page that got at least 100 sessions this week and produced no tour requests.

Tools it calls get_sync_status get_ga4_overview get_ga4_landing_pages

For stabilized communities, look monthly for slow erosion that weekly glances miss.

Ask your agent
Monthly read for every stabilized community: pull Search Console clicks and average position over the last 90 days, split into three 30-day blocks, and list the communities whose clicks dropped from each block to the next.

Tools it calls list_websites get_search_console_summary

Rather read than ask? An agent with action rights can schedule a weekly DuckDive email covering up to 50 websites, sent to your own account email.

Worked example: two communities in lease-up at once

Two buildings, two launch dates. Line them up by week since launch, not by calendar week, then put the calendar back in before drawing conclusions.

Ask your agent
For The Wren at Millbrook, which opened pre-leasing ten weeks ago, show weekly GA4 sessions and tour-request conversions since launch.

Tools it calls list_websites get_ga4_overview

EXAMPLE DATAFictional business: The Wren at Millbrook and Alder Flats

Show The Wren's first ten weeks of sessions and tour requests, and put Alder Flats' first ten weeks beside it. Alder launched pre-leasing in mid-June.

  1. list_websitesfinds both community websites
  2. get_ga4_overviewThe Wren, 90 days of daily data, grouped by launch week
  3. get_ga4_overviewAlder Flats, last 6 months, its first ten weeks grouped the same way
  4. get_ga4_landing_pagesThe Wren's busiest landing pages, last 30 days

The Wren peaked in weeks 3 and 4 and has slid since. Its tour-request rate went from 2.1% to 1.4% of sessions. Alder Flats kept climbing through the same launch weeks.

Weeks inWren sessionsWren toursAlder tours
1 to 21,1802225
3 to 41,4603134
5 to 61,3902641
7 to 81,2401944
9 to 101,1101547

Part of the gap is the calendar: The Wren's weeks 5 to 10 ran from early October to mid-November, Alder's from mid-July to late August, deep in leasing season.

Part is the site. In the last 30 days, /floor-plans took 38% of The Wren's sessions and converted at 0.4%, against 2.6% on the home page. Check that the floor-plans page offers a way to book a tour.

Google Analytics 4

Give the agent the launch date; GA4 does not know it. "Conversions" means tour requests here only because The Wren has one key event so far. Lining up more than two properties? Our guide on lining up GA4 properties when nobody pays for 360 covers time zones and mismatched key events.

See your own lease-ups on a launch-week timeline

Link two community websites, then ask how their first ten weeks of tour requests compare and which page is leaking.

Continue with Google

Free for 2 sites · No credit card

Tour requests and application starts as conversions

DuckDive's GA4 tools report conversions as one total per day, source or landing page, without saying which key event fired. Mark five actions as key events and your agent sees one blended number. So decide which actions count, and keep that list identical at every community you compare.

Which actions on a community website to mark as key events
Action on the siteKey event?Why
Tour request submittedYes, at every communityThe closest website signal to a signed lease
Interest list sign-upPartly, pre-leasing onlyRetire it once tours open, or counts get mixed
Apply button clickedPartly, once applications openAdds to tour requests in one conversion total
Phone number tappedPartly, only if the leasing line is separate from maintenanceOn a shared number, residents reporting a leak tap it too
Resident portal or pay-rent clickNoCurrent residents, not prospects; it inflates every rate

Based on how DuckDive's GA4 tools report conversions, checked November 16, 2026.

Applications need care. If your Apply button hands applicants to a leasing portal on another domain, note that Google's page on cross-domain measurement explains that without it, each domain sets new cookies, so one person counts as two users with two sessions. The click on your own Apply button is the signal you control; completed applications live in your property system.

Resident traffic

Stabilized community sites get many visits from current residents paying rent or reporting repairs. Count those clicks as key events and a building with settled residents looks like a leasing machine.

Tour request
A submitted form or booking for an in-person, self-guided or virtual tour. The main conversion for a community site.
Application start
A click on the site's Apply button, counted before the visitor leaves for the leasing portal.
Key event
Any event you flag in GA4 as important to the business; at a community site, usually the tour request. GA4 used to call these conversions, and in Google's current wording "conversion" now means an action that measures ad campaigns, which you can build in Google Ads from a key event.
Tour-request rate
Conversions divided by sessions, valid when tour requests are the site's only key event.

Leasing season and what it does to comparisons

Apartment demand still bunches up in the warmer months. RealPage's 2024 look at prime leasing season defines it as roughly April to September and says most annual absorption happens there. It also notes that first-quarter demand averaged about 12% of the year's total over the previous decade, leaving out 2022. The peak has softened, but a November week is still not a July week.

New supply adds drag. The NAHB, reporting Census survey data in March 2026, found that 47% of new apartments completed in the quarter it studied were leased within three months, the fourth straight quarter below half. When a rival building opens nearby, tour requests can fall with nothing wrong on your site.

Three rules keep season from fooling you:

  1. Compare lease-ups by launch week, then name the months. A spring launch and a fall launch are not a fair race.
  2. Judge a stabilized community against its peers in the same weeks. If every community in a metro fell in December, that is the season. If one fell and its neighbors held, that is a problem.
  3. Be careful with year-over-year. DuckDive's tools reach back 12 months at most, so the same weeks last year are out of reach through your agent.
Ask your agent
For every stabilized community, set conversions for the last 30 days against the previous 30. Work out the group's median change, then list only the communities that fell at least 10 points further than that median.

Tools it calls list_websites get_ga4_overview

The median turns a slump that hits everyone into a short list of communities falling on their own. Senior housing runs on longer decisions; see how comparisons change for senior living communities.

Worked example: communities that lean on listing-site referrals

In GA4, an untagged click from a listing lands in the Referral channel, with the listing's domain, such as apartments.com or zillow.com, as the source. Because session source is assigned per session, a renter who later searches your name adds a second, organic session.

So the share of a community's sessions sourced from listing sites measures dependence. A high share is not bad in itself; it shows which websites would go quiet if a listing package lapsed.

Ask your agent
For every community, show GA4 sessions by traffic source for the last 30 days and rank communities by the share that came from apartment listing sites.

Tools it calls list_websites get_ga4_channels

Give the agent the listing-site domains you pay for, so it does not count a local news site as a listing.

EXAMPLE DATAFictional business: Kingsgate Commons and Halden Ridge Apartments, in a five-community set

Rank these five communities by listing-site share for the last 30 days, and tell me why Kingsgate Commons and Halden Ridge look so different.

  1. list_websitesfinds the five community websites
  2. get_ga4_channelseach site, sessions and conversions by traffic source, last 30 days
  3. get_search_console_summaryclicks and position for the two outliers

Kingsgate Commons is the most dependent: 58% of its sessions came from the listing sites on your list, and only 14% from organic search. Halden Ridge is the reverse.

CommunitySessionsListingsOrganic
Kingsgate Commons3,42058%14%
Sedgefield Court2,88041%27%
Alder Flats4,96033%22%
Larkspur Yard2,15029%38%
Halden Ridge Apartments3,71021%46%

Search Console agrees: Kingsgate earned 410 clicks at an average position of 11.8, Halden Ridge 1,530 at 4.2. Kingsgate's listing sessions still produced 19 of its 41 conversions, so the listings work. The risk is that its website has little else to lean on at the next listing renewal.

Google Analytics 4 Search Console

Two cautions. Leads submitted on the listing site itself never reach your website, so this share measures website traffic, not leasing credit. And tagged listing links may land in another channel, so check one community's raw sources first. When a page ranks well and visitors still do not book, the fix is laid out in our guide to ranking pages that book nobody.

Adding occupancy from your property system by hand

DuckDive has no connection to property management software. Instead, export one small table each week, community name and occupancy, and paste it into the conversation. The agent pulls the matching website numbers and lines the two up.

Say which number you paste: physical occupancy, leased percentage and exposure tell different stories, and lease-ups belong on leased percentage. Paste community totals only, never resident names.

Ask your agent
Here is this week's occupancy for our eight Corran Valley communities. Match it to each community's GA4 conversions and tell me where marketing and occupancy disagree.

Tools it calls list_websites get_ga4_overview get_ga4_landing_pages

EXAMPLE DATAFictional business: the eight Corran Valley communities

Occupancy pasted from our property system this morning (leased % for the two lease-ups). Where do marketing and occupancy disagree?

  1. list_websitesmatches the eight pasted names to their websites
  2. get_ga4_overvieweach site, last 90 days, split into the last 30 days and the 30 before
  3. get_ga4_landing_pagesColdharbour Lofts, last 30 days, to check its tour page

Conversions are the last 30 days, compared with the 30 before. Two communities disagree with their occupancy, one has a tracking fault, one is weak on both counts, and one of the two lease-ups is slipping.

CommunityOccupancyConversionsChange
Coldharbour Lofts94.3%0-100%
Kingsgate Commons95.1%41-32%
Halden Ridge Apartments88.4%73+11%
The Wren at Millbrook22% leased36-38%
Ovington Place90.2%30-36%
Alder Flats64% leased96+9%
Larkspur Yard96.0%44+7%
Sedgefield Court93.7%52-5%

Coldharbour Lofts fell to zero conversions while its sessions held steady, and /schedule-tour still brought in 212 landing sessions over the last 30 days without one conversion. That is a broken tag or form, not the market.

Halden Ridge has rising conversions and the lowest stabilized occupancy. Tours are not closing: check follow-up speed and pricing.

Kingsgate Commons is nearly full while website conversions fell by a third. Fine today, but watch it before spring turnover.

Ovington Place is weak on both, so that one is a marketing problem.

The Wren at Millbrook shows the second-largest drop, and at 22% leased it has the most units left to fill. It is the slide from the launch-week example: fall weeks plus a /floor-plans page with no booking path. Fix that page before adding ad spend. Alder Flats, at 64% leased with conversions up 9%, needs nothing this week.

Google Analytics 4

Pasted figures are not stored in DuckDive, so next week you paste again. Keep the export to the same columns each time and the comparison stays consistent.

Build a community inventory before anyone connects a site

With 20 to 150 communities, connecting is quick; finding who holds each community's Analytics is not. Sites launched by a developer's agency or inherited in a management takeover sit under Google accounts head office has never seen. Fill in one table first.

EXAMPLE DATAFictional business: five rows from the Corran Valley inventory
CommunityWhere the site livesWho holds its GA4Stage
The Wren at MillbrookOwn domainOur marketing accountLease-up
Alder FlatsOwn domainDeveloper's launch agencyLease-up
Kingsgate CommonsOwn domainPrevious manager's web vendorStabilized
Halden Ridge ApartmentsOwn domainOur marketing accountStabilized
Brackenmoor TerraceA page on our corporate domainCorporate propertyStabilized
  1. Give every community a row, and be honest about where it lives

    DuckDive pairs each website with a single Analytics property and a single Search Console site. A community on its own domain becomes its own DuckDive website. One that exists only as a page on your corporate domain, like Brackenmoor Terrace, shares the corporate property, so you compare it through its page paths.

  2. Ask outside holders for access while the handover is fresh

    For every row held by a developer's agency or a former manager's vendor, request access for your company's Google account in both GA4 and Search Console, ideally the week you take over, while the outgoing team still answers email. Then sign in to DuckDive with that same company account: it can only offer properties that account opens, so one shared with a leasing manager's personal Gmail will not appear.

  3. Give the finished table to your agent

    If your AI app is not connected to DuckDive yet, start with the one-line setup prompt in this page's header. Claude, Cursor and Claude Code work; ChatGPT needs a Business or Enterprise plan. Then paste the inventory with this request:

    Ask your agent
    Here is our community inventory. For each row marked "Own domain", add a DuckDive website named after the community with its stage in brackets, attach whichever GA4 property and Search Console site carry its name, and give me a list of the rows you could not match.

    Tools it calls get_setup_status add_website list_available_sources connect_website_sources

    The person running this needs an admin role with actions allowed. A Google property can be linked to a single DuckDive website only, so the agent checks with you before pulling one away from a site that already uses it.

  4. Add a "history loaded" column and tick it off

    Linking a source starts copying that community's history into DuckDive, usually within minutes, longer for a site with years of data. Ask the agent to fill the column from each website's sync status, and hold the first Monday lease-up check until both lease-up rows are ticked.

Also running sites for unrelated businesses? See the weekly sweep for website portfolio operators, and what DuckDive reads from Google Analytics 4.

Where multifamily marketing analytics stops and your property system starts

DuckDive covers what Google sees about your community websites. Know what sits outside that before you promise anyone a report.

  • Leases, occupancy, guest cards and renewals. These stay in your property management system. There is no integration; you paste.
  • Calls to the leasing office. No call-tracking platform feeds DuckDive, so a prospect who phones straight from a listing or a banner on the building leaves no trace. A tap on the site's phone link shows up only when GA4 logs it as an event, and it means leasing interest only when maintenance has its own number.
  • Renter ratings. Nothing from Business Profile reaches DuckDive. For communities whose listings run through Yext, your agent sees review totals and star averages by publisher, while the words renters wrote stay in Yext.
  • Where renters come from. Website numbers come by day, by channel or source, and by landing page only, so relocation questions about renters' home cities need GA4 itself.

To trace every lease back to its marketing source, a lead management or attribution tool tied to your property system is the better fit. DuckDive answers which community websites pull their weight and which need a look this week.

Leasing teams' doubts, answered

Can DuckDive read occupancy or leases from our property management system?

No. Every DuckDive source is a marketing platform (GA4, Search Console, Google Ads, Local Services Ads, Yext, Local Falcon), and none of them holds leases. Export community-level occupancy from your property system and paste it into the conversation; the agent lines it up with each community's website numbers.

Can our on-site leasing managers ask questions too?

Yes, and their best questions are about their own building: did tour requests at Alder Flats rise over the last 7 days, and which floor-plan page drew the visits? A community manager links their own AI app as a team member, which means reading numbers and changing nothing, for the communities their DuckDive login already covers. Adding communities, linking sources and the weekly email stay with an admin.

Is it safe to paste occupancy into an AI chat?

Paste community totals only, never resident or unit details. The chat itself stays between you and your AI app; DuckDive only answers the data requests it makes. Your AI provider's terms decide how a pasted occupancy table is handled, so have your compliance lead read those terms before the first weekly paste.

What does it cost for a portfolio with dozens of communities?

Billing counts community websites. One community costs nothing and needs no card, so you can trial a single lease-up first. After that, a year with three new lease-ups adds three sites to the bill. The per-site rate sits in the table below; for a large portfolio, ask through Talk to us where custom pricing starts for your community count.

Sources

  1. Three Effects of Peak Supply on the U.S. Apartment Market, RealPage Analytics, checked November 16, 2026.
  2. Housing in personalized advertising, Google Advertising Policies Help, checked November 16, 2026.
  3. Lease-Up Demand is Solid, But it Doesn't Feel Like It, RealPage Analytics, checked November 16, 2026.
  4. Set up cross-domain measurement, Analytics Help (Google support site), checked November 16, 2026.
  5. Conversions vs. key events in Google Analytics, Analytics Help (Google support site), checked November 16, 2026.
  6. Does the U.S. Apartment Market Still have a Prime Leasing Season?, RealPage Analytics, checked November 16, 2026.
  7. Multifamily Absorption Rate Remains Below 50%, NAHB Eye on Housing, checked November 16, 2026.
  8. Default channel group, Analytics Help (Google support site), checked November 16, 2026.
  9. Scopes of traffic-source dimensions, Analytics Help (Google support site), checked November 16, 2026.

Last reviewed . Numbers in EXAMPLE DATA blocks are fictional.

Put every lease-up on a weekly watch

Link each community's Analytics and Search Console once, then question a single lease-up or every community you manage in the week occupancy shifts.

Free for 2 sites · No credit card · Working in an agent? Let it set DuckDive up